a p4409agem-hf advanced power p-channel enhancement mode electronics corp. power mosfet simple drive requirement bv dss -35v low on-resistance r ds(on) 7.5m fast switching characteristic i d -14.5a rohs compliant description absolute maximum ratings@ t j =25 o c(unless otherwise specified) symbol units v ds v v gs v i d @t a =25 a i d @t a =70 a i dm a p d @t a =25 w w/ t stg t j symbol value unit rthj-a maximum thermal resistance, junction-ambient 3a 50 /w this product is sensitive to electrostatic discharge, please handle with caution. use of this product as a critical component in life support or other similar systems is not authorized. herein; neither does it convey any license under its patent rights, nor the rights of others. apec reserves the right to make changes without further notice to any products herein to improve reliability, function or design. data and specifications subject to change without notice apec does not assume any liability arising out of the application or use of any product or circuit described halogen-free product thermal data parameter total power dissipation 2.5 -55 to 150 operating junction temperature range -55 to 150 linear derating factor storage temperature range drain current 3a , v gs @ 10v -12 pulsed drain current 1 -50 0.02 parameter drain-source voltage gate-source voltage drain current 3a , v gs @ 10v 1 rating -35 + 20 -14.5 201412312ap s s s g d d d d so-8 g d s a dvanced power mosfets from apec provide the designer with the best combination of fast switching, ruggedized device design, low on- resistance and cost-effectiveness. the so-8 package is widely preferred for all commercial-industrial surface mount applications and suited for low voltage applications such as dc/dc converters. .
electrical characteristics@t j =25 o c(unless otherwise specified) symbol parameter test conditions min. typ. max. units bv dss drain-source breakdown voltage v gs =0v, i d =-250ua -35 - - v r ds(on) static drain-source on-resistance 2 v gs =-10v, i d =-7a - - 7.5 m v gs =-4v, i d =-7a - - 15 m v gs(th) gate threshold voltage v ds =v gs , i d =-250ua -1 - -3 v g fs forward transconductance v ds =-10v, i d =-7a - 7 - s i dss drain-source leakage current v ds =-30v, v gs =0v - - -10 ua drain-source leakage current (t j =70 o c) v ds =-24v, v gs =0v - - -25 ua i gss gate-source leakage v gs =+ 20v, v ds =0v - - + 30 ua q g total gate charge 2 i d =-14a - 58 90 nc q gs gate-source charge v ds =-30v - 7 - nc q gd gate-drain ("miller") charge v gs =-4.5v - 37 - nc t d(on) turn-on delay time 2 v ds =-15v - 15 - ns t r rise time i d =-1a - 13 - ns t d(off) turn-off delay time r g =3.3 -76- ns t f fall time v gs =-10v - 60 - ns c iss input capacitance v gs =0v - 4100 6600 pf c oss output capacitance v ds =-25v - 640 - pf c rss reverse transfer capacitance f=1.0mhz - 530 - pf source-drain diode symbol parameter test conditions min. typ. max. units v sd forward on voltage 2 i s =-14a, v gs =0v - - -1.3 v t rr reverse recovery time 2 i s =-14a, v gs =0 v , - 46 - ns q rr reverse recovery charge di/dt=100a/s - 44 - nc notes: 1.pulse width limited by max. junction temperature. 2.pulse test 3.surface mounted on 1 in 2 copper pad of fr4 board a , t < 10sec 2 ap4409agem-hf (a) 1 in 2 pad of 2 oz copper (b) 125 /w when mounted on a 0.003 in 2 pad of 2 oz copper .
fig 1. typical output characteristics fig 2. typical output characteristics fig 3. on-resistance v.s. gate voltage fig 4. normalized on-resistance v.s. junction temperature fi g 5. forward characteristic o f fig 6. gate threshold voltage v.s. reverse diode junction temperature 3 ap4409agem-hf 0 10 20 30 40 50 01234 -v ds , drain-to-source voltage (v) -i d , drain current (a) t a =25 o c - 10v -7.0 v -5.0 v -4.5 v v g = - 3.0 v 0 10 20 30 40 50 01234 -v ds , drain-to-source voltage (v) -i d , drain current (a) t a = 150 o c -10v - 7.0 v - 5.0 v - 4.5 v v g = - 3.0 v 6 8 10 12 14 16 18 246810 -v gs , gate-to-source voltage (v) r ds(on\) (m ) i d =-7a t a =25 0.6 1.0 1.4 1.8 -50 0 50 100 150 t j , junction temperature ( o c) normalized r ds(on) i d =-7a v g =-10v 0.2 0.6 1.0 1.4 1.8 -50 0 50 100 150 t j , junction temperature ( o c) normalized v gs(th) 0 2 4 6 8 10 0 0.2 0.4 0.6 0.8 1 1.2 -v sd , source-to-drain voltage (v) -i s (a) t j =25 o c t j =150 o c .
fig 7. gate charge characteristics fig 8. typical capacitance characteristics fig 9. maximum safe operating area fig 10. effective transient thermal impedance fig 11. switching time waveform fig 12. gate charge waveform 4 ap4409agem-hf q v g -4.5v q gs q gd q g charge 0.001 0.01 0.1 1 0.0001 0.001 0.01 0.1 1 10 100 1000 t , pulse width (s) normalized thermal response (r thja ) p dm duty factor = t/t peak t j = p dm x r thja + t a rthja=125 o c/w t t 0.02 0.01 0.05 0.1 0.2 duty factor=0.5 single pulse 0 4 8 12 16 0 30 60 90 120 q g , total gate charge (nc) -v gs , gate to source voltage (v) i d = -14a v ds = - 30 v 0.01 0.1 1 10 100 0.01 0.1 1 10 100 -v ds , drain-to-source voltage (v) -i d (a) t a =25 o c single pulse 1ms 10ms 100ms 1s dc 100 1000 10000 1 5 9 1317212529 -v ds , drain-to-source voltage (v) c (pf) f =1.0mh z c iss c oss c rss t d(on) t r t d(off) t f v ds v gs 10% 90% .
ap4409agem-hf marking information 5 4409agem ywwsss part numbe r date code (ywwsss) y last digit of the year ww week sss sequence package code meet rohs requirement for low voltage mosfet only .
|
